Showing posts with label moulds. Show all posts
Showing posts with label moulds. Show all posts

8 August 2010

Modelling Mates review

I recently bought a set of Modelling Mates moulds from TerraScenic, they looked like a bargain at £21.60 so I thought I'd have a go.

Click to zoom


The photo above shows what you get for your money. Three moulds, each one 6 1/2 inches square. One is of cubes, the other blocks twice the size of the cubes, and the final miscellaneous pieces.

The variety is great and the sheer number of pieces you get per mould means you won't be casting as often.

The moulds are made from EVA foam, which to me is the stuff on my golf trolley handle, but you may know it in other ways! It's a dense, flexible foam which seems rather sturdy. The base is a softer material which is glued to the main body.

Click to zoom Click to zoom


A comparison with a basic Hirst Arts block is shown above. As you can see these blocks are much bigger and therefore not interchangable with HA. Based on the number per cast though I could see you building a small tower with only two or three casts of each mould.

The texture is very different. HA blocks are sculpted and very detailed, but the pattern on MM blocks comes from the foam itself. It reminds me of a fine concrete. Texture is on sides and bottom just as with HA blocks.

The casts require a small amount of cleaning. It appears the moulds where sliced to form the cavities, and in doing so there has been a small amount of over-cut. So each cast brick will have a few mm of plaster on each corner which can be removed with a single pass of a sharp knife.

Click to zoom


Above is a photo of my current assembly, I'll get a complete photo when done. This is going to be the lighthouse of Stadtheim bay. The misc mould has three different radius curves on it, which will work nicely for me and offers good flexibility.

Overall I'd say they offer a cheap alternative to HA and will provide nice variety of texture for the terrain builder. I doubt these will last anything like as long as HA moulds (the base seems to deform slightly at each demoulding and I'm worried about tearing the foam at some of the weaker points), but for pure value for money you can't argue. Three moulds for the same prices as only 2/3s of a Hirst Arts one seems like too good a deal to me.

I'll post a finished model when I've got one, and let you know how I get on with the long term survivability of the moulds. In the meantime though I'd recommend giving them a look.

3 August 2010

Stadtheim Lives!

I'm back. It's been a while since I've had time/inclination to work on the town but currently on holiday from work and finding time to get stuck back in.

Bought some depron, which I'm using for the ground floor of the tavern, that's going quite well. Also learned how to mould/cast stuff, so trying to sort out my own windows later.

Couple of new purchases arrived today. From Renedra I bought a couple of sets of barrels. Big ones are about 15mm high, little ones about 10mm. Seem very well scaled for 28mm models so I'll be scattering these around.

Then from TerraScenic I bought a set of Modelling Mates moulds. Basically a cheaper version of Hirst Arts moulds. Made from EVA foam (the stuff you get on fishing rod and exercise bike handles), they lack the detail and quality of the HA stuff. However for 2/3 the price of a single HA mould you get THREE of these. Plus they're a lot larger, the basic block one has 28 individual blocks.

I'm casting up my second batch now, once I have enough to build something I'll show it. They're a little larger than HA bricks but should work well to give variety to my town.

Finally I'm working on the canal section. The warehouse is almost up to roof line and I'm building a small cargo barge to go under the crane.

Photos coming.

19 October 2009

Canal

I'm back! So I've not been slacking on the actual project, but I have been somewhat lax in updating this blog. Therefore tonight I've taken a load of photos of the current progress.

First up is the new canal board. This is the sort of piece I've wanted to do since starting this project (and long before) and I'm enjoying it immensely. However casting all these blocks with only a prison tower mould is a pain (only 8 normal blocks per cast). So I've ordered a second mould which should help.

Click to zoom Click to zoom Click to zoom Click to zoom

This is going to form the basis of the canal pieces. There will be four in total, one in a 90degree turn. The left hand side in the top photo stops at tier one, the right at tier two. This will limit the flexibility of the boards but should add some very cool dynamics to the final piece. I hope.

The building in the middle is going to be a warehouse. It will go up two storeys above the top level before being peaks on the third. I'll do a gantry on the canal side and a simple jib to allow loading into barges.

Do need to figure out how best to do water. I've got a bottle of water effects but I think it could get expensive. Ideally it will cover the small walkways. The theory being they're underwater, but you can see them and use them if you need to.

Oh and my first figure! The warrior monk duder. Just a few pieces I had kicking around from a bitz buy on ebay. I think I'll paint him up and he can be the "barry" for this project.

30 August 2009

More bits!

Another order has just arrived from the terrain store. They do precast hirst arts blocks at a very reasonable rate, this little pile was about 12quid I think. The casts are pretty good, though the plaster is softer than the type I use myself. Don't see it beng a problem though, the church tower is made from them and they're fine.

Click to zoom

Unwrapped and put in this box to dry out, sitting in the sun yesterday has done that so they're ready to go.

I bought two types of floor slabs, 1 1/2" square each. There are basic rough textured slabs, then a mixed bag of bricks, herringbone and concentric. All look great and will be awesome in my town square as my chess board.

Speaking of the chess board, I'm going to go for dwarfs vs chaos dwarfs. Should be great, though I'll have to convert my own CDs since the old plastics go for a fortune on ebay, and the new ones are rumoured to be FW only. Hardly a cheap solution. Chaos Dwarf Online has lots of guides for converting and I'm not bad with greenstuff, so I'm sure I'll manage.

Just wish I had more time to work on this, work is batshit insane at the moment and taking up a big chunk of my free time. Still, when I'm retired by 35 I'll have plenty of time to work on my models. hehe.

20 August 2009

Watch Tower Roof

The watchtower roof is now complete. Very happy with the finished result, colour is a little darker than shows in the pics. The build was easy, and the paintjob itself very simple. A bright blue undercoat, a black wash (both cheap poster paint), then drybrush with a light grey to "mucky" it up a bit.

Click to zoom Click to zoom

I'm going to use this roof style across all the slate roofed buildings. I figure a small town like this would most likely use the same quarry anyway and it'll bring uniformity across the rag tag collection of buildings.

Also done the wooden ballustrade around the top of the tower, as well as the door. This all needs painting now.

Having trouble casting enough floor blocks for the base, might need to buy a different mould. I only have 1 of the pieces I need, and I need several dozen to get it finished. Most frustrating.

9 August 2009

Random Postage

Quick random one. Was in the range (a rather useful hobby/stuff shop) the other day and bought a little case for all my hirst arts casts. Works really well, much better than having them kicking around in a box lid like before.

Click to zoom

30 July 2009

Watch House Board

The watch house now has a board sorted out. It's going to be very simple, no other buildings on it. Just a very small square outside the watch house yard itself.

Started building the floor of the yard using the new terrascenic cobbles mould. The mould itself isn't bad, because it's so much more shallow than the hirst arts moulds it does tend to warp a little in the middle of the large pieces, giving each big cobble brick a slight hump back. For this set it doesn't matter, since the cobbles are uneven anyway, but if I was casting smooth blocks it would be a tad annoying. Could just be my cheap plaster of course.



Before bed I plan to have a go at the doors for the watch tower. Other things are drying so I can't really do much more on the yard itself. I need to go set the cobbles casting again though. Did that the other night and completely forgot to go scrape the mould. Hah, now I've got two sets of pieces that need several mm of overflow scraping off before use. Still, live n learn. I hope.

27 July 2009

Watch House Update

Started the walk way for the watch tower over the weekend. I've cut in and fitted the joists, as well as sorted out the wooden boards. I now need to tidy up the joists to fit better, then detail the boards a little.

After that it needs a hand rail and four corner supports and a roof.



I have also started the watch house part which will be linked to the tower via a bridge (to the open arch way half way up). The ground floor will be solid stone with no entrance, then up the front will rise a stairway. Behind will be stables underneath the overhanging first floor.



I really need to sort out some sketches, but it all kind of makes sense in my head, so I guess that's what counts for now!

24 July 2009

New Mould

Excellent, my new mould from TerraScenic arrived this morning. It's their broken cobblestone mould, which I'm planning on using for the courtyards at the brewery and watch house for starters.

It's currently casting up at the moment. I'll get some photos once I de-mould the pieces and we'll see what they look like.

Oh and huge thanks to Gary at TerraScenic for sorting out a replacement mould for one the post office snaffled. Cheers mate.

23 July 2009

Watch House

I'm going to love this when it's done, I just know it. Will be very hard to describe. Basically this is the watch tower, then it will be linked by a bridge a couple of storey's up to the main watch house. Then there will be a courtyard and stables out the back.

I've now taken this up to roof level. I'm going to chisel out the top of some of the bricks to lay balsa joists, then a narrow wooden floor will extend the current stone walkway around the top. Capped with a big pointed slate roof this should give a traditional roman style watch tower.




Did I mention I love Hirst arts? Just so easy to work with and will work out very cost effective. I'm going to do quite a few of the town houses with a couple of layers of stone for foundations. Should give a nice unifying feel to the whole town too.

Church

My favourite building so far, the church. Currently looks like a ruin, but it won't be when it's done. Far too many destroyed churches in wargaming if you ask me.

Obviously a hirst arts build. I bought a precast bell tower set, but was so impressed with all the extra components I decided to build extras. I had a go at casting a few basic blocks of my own to fill the gaps but it wasn't wholly successful. I've got plenty of real ones now having bought a mould, so I'll knock down the body and try again.




Yet to figure out how to do the stained glass windows. I'm going to put a solid looking wooden door in the inside of the bell tower (so you'll still be able to see inside the base), and a lean-to type affair at the rear.

For the bell tower statues I've picked out a few from Denizen miniatures. It's going to retell the story of a famous knight against the undead hordes. Should be nifty.